- Use Only Insulating tools
- Do not connect while circuit is live
- Place the SDM630M CT meter only in dry surroundings
- Don’t mount the SDM630M CT meter in a explosive area
- Make sure the wires are suitable for the maximum current of the meter.
- Make sure the AC wires are connected correctly before activating the current/voltage to the meter.
- Don’t touch the meter connecting clamps directly with metal, blank wire and your bare hands as you may get electrical shock.
- Make sure the protection cover is placed after installation.
- Never open the meter case , don’t drop or allow strong physical impact on the meter.
Recensisci per primo “SDM630MCT MID, 100A, mono +3 Phases (3w & 3w+N/380V+N), Din Rail Energy Meter, RS485 Modbus RTU and 2 Pulses Output, MID approved”
Prodotti correlati
€80.00
€70.00
€100.00
Recensioni
Ancora non ci sono recensioni.